HP XP20000/XP24000 Reference Manual page 21

Table 2 Items in Audit Log Information File (continued)
No. Item
2
6 Function name
7 Operation, event, or interface
3
name
8 Parameters
9 Operation result or received
command result
10 Identification information for host
sending the log
1 1 Identification information for
application
12 Log information sequence number
Explanation
The abbreviation indicating the function or option which has been used
to perform the setting operation is output. See
File Functions, Operations, and Programs" (page 27)
between the abbreviation output and the actual function.
This information is not output when commands are received from the
host.
The operation, event, or interface name.
See "Audit Log Information File Functions, Operations, and Programs"
(page 27) for a list of functions and how they relate to operations or
options. See "Audit Log Information File Output by Function" (page 259)
for the relationship between GUI operation and the operation name
output to audit log information files for each option. See
Output to the Audit Log File" (page 273)
operation of SVP and the operation name output to audit log information
files.
Parameters for certain functions, such as Modify for the ChangeMode
operation.
For some operations, such as Paircreate, parameters display as detailed
information on the following line or lines. These detailed parameters
include an Index and the Values you set (see
The end result of your operation or the result of the received commands.
1. Operation result
Normal end. The operation has ended normally.
Error (xxxx-yyyyy). The operation has ended abnormally and an
error code appears.
Warning (xxxx-yyyyy). The operation has partly ended abnormally
or was canceled during the operation.
Error codes are described as xxxx-yyyyy. For more information, see
HP StorageWorks XP24000/XP20000 Remote Web Console Error
Codes. SVP operations do not output error codes.
2. Received command result
Normal end. The FC-SP authentication has ended normally.
Error. The FC-SP authentication has ended abnormally.
Accept. Received the commands from the host.
Reject. Rejected the commands from the host.
Displays identification information (WWN, IPv4 address, IPv6 address,
and serial number) of the host that sent the command. For more
information, see "Audit Log Information for the Commands Sent from
the Host" (page 252).
This information is output when commands are received from the host.
Displays application identification information. For more information,
see "Audit Log Information for the Commands Sent from the Host"
(page 252).
This information is output when commands are received from the host.
However, the information is not output when FC-SP are received.
The sequence number of the saved log information (0000000000 to
4294967295). When the number reaches 4,294,967,295, it is reset
to 0000000000.
"Audit Log Information
for the relationship
"SVP Operations
for the relationship between
Figure 4 (page 20)).
Audit Log Information File 21