HP XP External Storage Software function
Inflow-Control
Inflow-Control operation
Enable
Enable is selected as the parameter. The operation uses the parameters shown in
103).
Table 94 Parameters for Inflow-Control Operation
Parameter
Enable
Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 95 Inflow-Control Operation
Item
Group
Result
Num. of Groups
UnitePathGroup Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UVM],UnitePathGroup,,Normal end,,,Seq=xxxxx
+{PathGroup,TargetPathGroup,Result}=[{1,2,Normal end},{1,3,Normal end},{11,12,Normal end}],
Num. of PathGroups=3
[Ext Stor]
HP XP External Storage Software function
UnitePathGroup
UnitePathGroup operation
Normal end
The operation has ended normally
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Description
The cache memory is used.
The cache memory is not used.
Description
External volume group number for the executed setting operation.
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of external volume groups configured.
Table 94 (page
Table 95 (page
103).
Table 96 (page
104).
UnitePathGroup Operation 103