Blockpaths(Fibre) Operation - HP XP20000/XP24000 Reference Manual

Table 84 AddVolume(FIBRE) Operation (continued)
Item
Inflow
Result
Port
WWN
LUN
Num. of Paths
LDKC:CU:LDEV
LDEVCapa(blocks)
SSID
Num. of LDEVs
Num. of Volumes

BlockPaths(FIBRE) Operation

This logged information indicates that the Disconnect-Paths operation was only requested, but not
finished .
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],BlockPaths(FIBRE),,Normal end,,,Seq.=xxxxx
+{Port,WWN,Result}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end},
{2A,50560E8000C3E212,Normal end}],Num. of Paths=3
[Ext Stor]
HP XP External Storage Software function
BlockPaths(FIBRE)
BlockPaths(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 85 BlockPaths(FIBRE) Operation
Item
Port
WWN
Description
The inflow control set to the cache of the mapped external volume
Enable: Enabled, Disable: Disabled
The result of the operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The port name of the external port of the local storage system
The WWN of the Target port of the external storage system
The LUN of the external volume
The number of mapping path (Port-WWN-LUN) configured
The LDKC, CU, and LDEV numbers of the LDEVs in the mapped external volume. The
number on the left of the colon is an LDKC number, the number between the colons is a
CU number, and the number on the right of the colon is an LDEV number
The capacity of LDEVs in the mapped external volumes indicated by blocks
The SSID
The number of LDEVs in the mapped external volumes
The number of mapped external volumes
Description
The port name of the external port of the local storage system.
The WWN of the Target port of the external storage system.
Table 85 (page 97).
BlockPaths(FIBRE) Operation 97