Downgrading The Disk Array Firmware For Hp-Ux 11.11 Hosts - HP Surestore Disk Array 12h - And FC60 Advanced User's Manual
Hp surestore e disk array fc60 - (english) advanced user's guide
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- User manual (310 pages) ,
- System administrator manual (279 pages)
Table of Contents
Advertisement
swlist
3.
Execute the following command to create the required device files (this is not required
if the system was re-booted):
insf -e
4.
Run the Array Manager 60 amdsp command to re-scan the system for the array:
amdsp -R
Downgrading the Disk Array Firmware for HP-UX 11.11 Hosts
Controller firmware HP08 is not supported on HP-UX 11.11. If the disk array is being
installed on a host running HP-UX 11.11, it will be necessary to downgrade the controller
firmware to HP03 after installing the software.
1.
Identify the version of firmware on the disk array controllers by typing:
amdload -i ArrayID
2.
If the controller firmware is HP08, contact HP support for assistance in downgrading
the controller firmware.
Installing the Disk Array FC60 Software (HP-UX Only)
215
Advertisement
Table of Contents
Troubleshooting
