Running Expert Tool in Menu Mode
1.
At the system prompt:
– Type mstm
– Select Ok
2.
To select the disk array:
– Scroll down using the arrow key, select A5277A ARRAY.
– Press <Enter>
3.
To run the Expert tool:
– Select Menubar on or use arrow keys to get to Menubar
– Select Tools
– Select Expert Tool
– Select Run
4.
Perform the desired operation using the Expert Tool menus. The Expert Tool menu
options are listed in
5.
To exit Expert Tool:
– Select Menubar on or use arrow keys to get to Menubar
– Select File
– Select Exit
– Select Yes
Expert Tool Menu Options (xstm and mstm)
When using xstm or mstm, all Expert Tool functions are accessed from a series of menus.
The menus options are described in
Support Tools Manager
356
Table
46.
Table
46.