HP Surestore Disk Array 12h - And FC60 Advanced User's Manual page 395
Hp surestore e disk array fc60 - (english) advanced user's guide
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- User manual (310 pages) ,
- System administrator manual (279 pages)
Table of Contents
Advertisement
A - cam handle
B - locking screw
C - power supplies
D - power supply slot
Figure 98
Disk Enclosure Power Supply Module Removal and Replacement
Installing the Power Supply Module
1.
With the handle down, slide the replacement power supply into the empty slot (D in
Figure
98). The supply begins to engage the backplane with 3/8 inch (8 mm) still
exposed.
2.
Swing the handle upward to seat the power supply into the backplane. The power
supply should be flush with the chassis.
3.
Tighten the screw (B) in the power supply handle (A ).
4.
Plug the power cord into the power supply and electrical source.
5.
Check the Power Supply LED. It should then turn green. If the LED remains off or is
amber, see chapter 6, Troubleshooting for information on identifying and solving the
problem.
Disk Enclosure Modules
395
Advertisement
Table of Contents
Troubleshooting
