Managing The Disk Array Using Array Manager 60 - HP Surestore Disk Array 12h - And FC60 Advanced User's Manual

Managing the Disk Array Using Array Manager 60

The Array Manager 60 command line utilities allow you to configure, control, and monitor
all aspects of disk array operation. Array Manager 60 is intended for performing the more
advanced tasks involved in managing the disk array.
The Array Manager 60 utilities and the tasks they are used to perform are summarized in
Table 33 and Table 34.
You must log in as superuser or root to use the Array Manager 60 utilities to
Note
manage the disk array.
Table 33
Array Manager 60 Task Summary
Task
Capacity Management
Binding a LUN
Unbinding a LUN
Calculating LUN Capacity
Adding a Global Hot Spare
Removing a Global Hot Spare
Identifying Disks
Changing LUN Ownership
Replacing a LUN
Disk Array Status
Displaying Status Information
Listing Disk Array IDs
Rescanning for Disk Arrays
Managing the Disk Array Using Array Manager 60
276
Command
amcfg -L <cntrlrID>:<LUN> -d <channel:ID>,<channel:ID>.....
-r <RAIDlevel> <options> <ArrayID>
amcfg -D <LUN> [-force] <ArrayID>
amcfg -C -d channel:ID,channel:ID...
-r <RAIDlevel> -s <stripe> <ArrayID>
ammgr -h channel:ID <ArrayID>
ammgr -d channel:ID <ArrayID>
amdsp -d <ArrayID>
amcfg -M <LUN> -c <cntrlrID> <ArrayID>
amcfg -R <cntrlrID>:<LUN> -d <channel:ID>,<channel:ID>.....
-r <RAIDlevel> <options> <ArrayID>
amdsp <option> <ArrayID>
amdsp -i
amdsp -R