Installing the Disk Array FC60 Software (HP-UX Only)
Once the disk array hardware is installed and operating, the disk array management
software, diagnostic tools, and system patches must be installed. The software required for
the Disk Array FC60 is distributed on the HP-UX Support Plus CD-ROM (9909 or later).
System Requirements
The following host system requirements must be met to install and use the Array Manager
60 utilities successfully.
Table 29 System Requirements
Hardware platform
HP-UX version
HP 9000 Series, K-class, D-class, V-class, N-class, T-600
HP-UX 11.0, 11.11, and 10.20
Installing the Disk Array FC60 Software (HP-UX Only)
213