Using the STM Information Tool
The STM Information Tool gathers status and configuration information about the selected
disk array and stores this information in three logs: the information log, the activity log,
and the failure log.
Running Information Tool in X Windows
1.
At the system prompt:
– Type xstm &
2.
Click on the desired A5277A Array device icon.
3.
To run the Information Tool and view the Information log:
– From the menu bar, select Tools
– Select Information
– Select Run. The Information Tool builds and displays the Information log.
– Select Done when done viewing the log.
4.
To view the Activity log:
– From the menu bar, select Tools
– Select Information
– Select Activity Log.
– Select Done when done viewing the log.
5.
To exit STM:
– From the menu bar, select File
– Select Exit
Support Tools Manager
352