Managing The Disk Array Using Sam - HP Surestore Disk Array 12h - And FC60 Advanced User's Manual

Managing the Disk Array Using SAM

Most of the tasks involved in everyday management of the disk array can be performed
using SAM. Using SAM you can:
•
Check disk array status
•
Bind and unbind LUNs
•
Add and remove global hot spares
Does it make any difference which controller I select when managing
Note
the disk array?
When using SAM, you must select one of the controllers on the disk array you
want to manage. Typically you can select either controller to perform an
operation and the outcome will be the same. An exception is when you are
binding a LUN. The controller you select will be assigned ownership of the
LUN. To maintain I/O performance, you should divide the ownership of the
LUNs on the disk array between the two controllers.
Managing the Disk Array Using SAM
260