Hp-Ux Hosts - HP Surestore Tape Library Model 10/180 Configuration Manual

HP-UX Hosts

Table 1
6 Configuring the Host System
To enable communication between the host and tape library,
appropriate drivers must be configured into the HP-UX kernel. Table
1 shows which drivers are necessary for each device.
NOTE Some drivers have different names, depending on whether or
not they are listed in the output of an ioscan or in the system
file.
Drivers Needed
Device
SCSI Host Bus Adapter
(HSC or PCI Bus)
Fibre Channel Host Bus Adapter
Fibre Channel Bridge or
Multiplexer
Tape Library Robotics Controller
(HSC or PCI Bus)
Tape Driver (HSC or PCI Bus)
Driver Name
In ioscan In system file
c720 c720
fcp fcT1_fcp
fcT1 fcT1
fcT1_cntl fcT1_cntl
fcpmux fcpmux
sctl sctl
stape stape