Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
for each enclosure
for each enclosure
for each enclosure
for each enclosure
Figure 70
Split- Bus Configuration Switch Settings
Attaching SCSI Cables and Configuring the Disk Enclosure Switches
192
All segments set to "0"
All segments set to "0"
All segments set to "0"
All segments set to "0"
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
on both BCCs in the enclosure
on both BCCs in the enclosure
on both BCCs in the enclosure
on both BCCs in the enclosure
All segments set to "0"
All segments set to "0"
All segments set to "0"
All segments set to "0"
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC