HP Surestore 64 - Director Switch User Manual page 41

•
Backup & Restore Configuration
Select this option to save the product configuration stored on the director to the HP
EFC server hard disk or to restore the configuration data from the HP EFC server. Only
a single copy of the configuration is kept on the server.
This backup is primarily for single-CTP systems, where a backup is needed to restore
the configuration data to a replacement CTP card. You cannot modify the location or
the file name of the saved configuration.
For additional information on using this option, refer to Backup and Restore
Configuration on page 173.
You can only restore the configuration to a director with the same IP address.
•
Reset Configuration
Select this option to reset all director configuration data back to the factory defaults. A
confirmation dialog box displays with a warning upon selecting the option. For
additional information on using this option, refer to Reset Configuration on page 175.
This operation resets all configuration including any optional features that
C
AUTION
have been installed. You will need to re-enter your feature key to enable all
optional features after resetting the configuration.
Help
Place the cursor over the Help icon to display a menu that lists the following options.
•
Contents
Select this option to display the Help window. The Help window contains Contents,
Index, and Glossary buttons and
through information. Use the forward (>) and back (<) buttons to scroll forward and
hypertext-- linked items to help you quickly navigate
Using the Product Manager 25