Procedure - HP Surestore 64 - Director Switch User Manual

– Bind Port to Attached WWN - Places a check mark in the check box for the port
where you clicked to display the menu. This binds that port to the device currently
attached to that port. The Bound WWN column will display that device's WWN.
•
Bound WWN
– Bind All WWNs - Places a check mark in all check boxes in this column and binds
each port to the device with the WWN or nickname entered in the Bound WWN
column for that port.
– Unbind All WWNs - Removes check marks in all check boxes in this column. A
device with any WWN can attach to all ports.
– Bind All Ports to Attached WWN - Places a check mark in all check boxes in this
column and binds each port to the device currently attached to that port. The Bound
WWN column will display that device's WWN.
– Bind Port to Attached WWN - Places a check mark in the check box for the port
where you clicked to display the menu. This binds that port to the device currently
attached to that port. The Bound WWN column will display that device's WWN.

Procedure

To configure ports, use the following steps:
1. Place the cursor over the Configure icon and select Ports.
The Configure Ports dialog box displays.
120 Configure Ports