HP Surestore 64 - Director Switch User Manual page 206

Product manager
Hide thumbs Also See for Surestore 64 - Director Switch:
Table of Contents

Advertisement

Message
The Ethernet Link dropped.
The firmware file is corrupted.
This firmware version already
exists.
The link to the director is not
available.
The maximum number of
address configurations has
been reached.
The optical transceiver is not
installed.
The director did not accept the
request.
The director did not respond in
the time allowed.
The director is busy saving
maintenance information.
The director must be offline to
configure.
This feature has not been
installed. Please contact your
sales representative.
Threshold alerts are not
supported.
190
Appendix
Cause/Solution
Link was dropped by the director. Retry the operation. If the
condition persists, contact support personnel.
A firmware file has corrupt data. Contact support personnel.
Firmware version already exists in the database. N/A. An
informational message.
The link from the HP EFC Server to the director is not available.
Check Ethernet connection.
The maximum number of saved address configurations has
been reached. Delete configurations no longer needed to allow
new configuration to be saved.
No information available for a port that is not installed. Ensure
the optical transceiver is installed and fully seated.
The director was not able to perform the requested action. Retry
the operation. If the condition persists, contact support
personnel.
Director timed out while performing the last action. Retry the
operation. If the condition persists, contact support personnel.
Director is busy with a maintenance operation. Retry the
operation later. If the condition persists, contact support
personnel.
A configuration changed was attempted for a configuration
requiring offline changes. Take the appropriate actions to set the
director offline before attempting the configuration change.
Indicator that the feature has not been installed on this director.
Contact the your sales representative to obtain the desired
feature.
Threshold alerts are not supported in firmware releases before
1.03.00. Informational message.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surestore fc-64 director

Table of Contents