You can display a properties dialog box for all FRUs by right clicking on the FRU and
selecting FRU Properties from the menu that appears.
Display a Properties dialog box for an FPM card by right clicking on a card and selecting
FRU Properties from the menu that appears. To display a properties dialog box for an
individual port, you must be in the Port Card View. Refer to Using the Port Card View on
page 66 for details.
Figure 18
FPM Card FRU Properties Dialog Box
Displaying Director Information
Click on the director illustration, away from a hardware component, to display the Director
Properties dialog box as shown in the following figure.
Hardware View
57