HP Surestore 64 - Director Switch User Manual page 37

•
Export Configuration Report
Select this option to display the Export Configuration Report dialog box, which
enables you to specify a file name in which to save an ASCII text file containing all
current user-definable configuration options in a printable format. Note that this file
cannot be read back into the Product Manager in order to set configuration
parameters.
r Enable Web Server
Select this option place a check mark in the check box to enable the Embedded Web
Server Interface on the director. Select the option again to remove the check mark and
disable the Embedded Web Server Interface. When disabled, users at remote
workstations cannot access the interface.
•
Enable Telnet
Select this option place a check mark in the check box to enable telnet access to the
director. Select the option again to remove the check mark and disable telnet access.
When disabled, users at remote workstations cannot access the director through telnet
to use the Command Line Interface (CLI) or perform other tasks.
Logs
Place the cursor over the Logs icon to display a menu that lists the following options. For
detailed information on using these dialog boxes, refer to Using Logs on page 148.
•
Audit Log
This log provides a record of all configuration changes made on the director. Each
entry displays the date and time of the change, a description of the change, the source
of the change (such as the HP EFC server or SNMP management station), and an
identifier for the source, such as the IP address of the HP EFC server or SNMP
management station.
Using the Product Manager 21