•
Right-click the port connector to display a menu with Port Properties, Node Properties,
Port Technology, Block Port, Enable Beaconing, Diagnostics, Clear Link Incident
Alert(s), Reset Port, WWN Binding, and Clear Threshold Alert(s) options.
•
Click on a port connector to display the Port Properties dialog box.
•
Return the Hardware View by clicking Back to Full View.
•
Refer to Using the Port Card View on page 66 for detailed information on this view.
Port List View
Select the Port List View from the View menu. A table listing the port number, port name,
the block/unblock configuration, operating state, port type, and alert condition displays in
the main panel. Figure 8 shows an example of the Port List View.
32
Using the Product Manager