HP Surestore 64 - Director Switch User Manual page 81

Fan Module
Click a cooling fan module card in the Hardware View to display the FRU Properties dialog
box:
Figure 17 is an example for the Properties dialog box for the power supply module. For the
fan, the FRU name will be "Cooling Fan Mode," position (slot number in the backplane)
will be 1 or 0, and the state will be active, backup, or failed. The appropriate fan part
number and serial number will also be included.
SBAR Card Menu
Right click an SBAR card in the Hardware View to display a menu with the following
options:
•
FRU Properties
Select this option to display a FRU Properties dialog box for the card. Figure 17 is an
example for the power supply module. The FRU Properties dialog box includes the
FRU name, position (slot number in the backplane), state (active, backup, or failed),
part number, and serial number.
•
Enable Beaconing
Select this option to add a check mark to the check box and enable beaconing for the
SBAR card. This causes the amber LED on the card to flash to help you locate it in the
unit.
•
Switchover
You must have maintenance authorization rights to access this feature.
Select this option to display the Switchover SBAR dialog box which is similar to the
Switchover CTP dialog box (refer to Figure 24). Click Switchover to switch operation
from the active card to the backup card. When switchover occurs, the green LED
illuminates on the backup SBAR card to indicate that it is now the active card.
If you click the Enable Beaconing check box to add a check mark, the amber LED
beacons (blinks) on the card that was the active card before switchover.
Hardware View 65