New Threshold Alerts Dialog Box - First Screen - HP Surestore 64 - Director Switch User Manual

Figure 51

New Threshold Alerts Dialog Box - First Screen

3. Enter a name from one to 64 characters in length. All characters in the ISO Latin-1
character set, excluding control characters, are allowed.
4. Select one of the following from the drop-down list under the Name field:
– Rx Throughput. An alert will occur if the threshold set for receive throughput is
reached
– Tx Throughput. An alert will occur if the threshold set for transmit throughput is
reached.
– Rx or Tx Throughput. An alert will occur if the threshold set for either receive or
transmit throughput is reached.
5. Click Next.
A new screen appears with additional parameters. The name configured for the alert
appears at the top of the screen.
(Click Previous if you need to return to the previous screen.)
Configure Threshold Alerts 135