Safety Instructions - HP Surestore 64 - Director Switch User Manual

Notice
© Hewlett-Packard Company, 2002. All rights
reserved.
Hewlett-Packard Company makes no warranty of
any kind with regard to this material, including, but
not limited to, the implied warranties of merchant-
ability and fitness for a particular purpose. Hewlett-
Packard shall not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance, or use
of this material.
This document contains proprietary information,
which is protected by copyright. No part of this doc-
ument may be photocopied, reproduced, or trans-
lated into another language without the prior written
consent of Hewlett-Packard. The information con-
tained in this document is subject to change without
notice.
Your Hewlett-Packard Director Class Switch is a
highly versatile product capable of operating in a
multitude of configurations. Hewlett-Packard
designs and tests these configurations to optimize
product performance. As such, your particular instal-
lation may, or may not utilize all the features pre-
sented in this document. Always consult your
Hewlett-Packard representative for the latest config-
uration information.
Warranty
If you have any questions about the warranty for
this product, contact your dealer or local Hewlett-
Packard sales representative.
ii

Safety Instructions

Grounding
This product is a safety class I product and has a
protective earthing terminal. There must be an unin-
terruptible safety earth ground from the main power
source to the product's input wiring terminals,
power cord, or supplied power cord set. Whenever it
is likely that the protection has been impaired, dis-
connect the power cord until the ground has been
restored.
Service
Any servicing, adjustment, maintenance, or repair
must be performed only by authorized service-
trained personnel.
Format Conventions
Denotes
A hazard that can cause per-
WARNING
sonal injury
Caution A hazard that can cause hardware
or software damage
Note Significant concepts or operating
instructions
this font Text to be typed verbatim: all
commands, path names, file
names, and directory names
Text displayed on the screen
this font
<this font> Keys to be pressed, for example,
the <Return> key