Configure Ports Dialog Box - HP Surestore 64 - Director Switch User Manual

Figure 41

Configure Ports Dialog Box

Ports are numbered from 0 through 63.
2. Type a name that reflects the end device connected through the port in the Name field.
For example, use "XYZ Server," where XYZ is the brand name of the server.
3. Block or unblock operation for a port by clicking the check box in the Blocked column.
When a check mark displays, the port is blocked.
4. Enable or disable extended distance buffering for the port by clicking the check box in
the 10-100 km column. When a check mark displays, extended distance buffering is
enabled.
Enable or disable LIN alerts for the port by clicking the check box in the LIN Alerts
column. When a check mark displays, LIN alerts are enabled.
The factory default for LIN alerts is enabled.
5. Select a port type by clicking in the Type field and selecting from the list.
6. Prevent an unspecified device from being connected to the port by clicking the check
box in the WWN Binding column.
Configure Ports 121