HP Surestore 64 - Director Switch User Manual page 135

• 10-100 km
– Clear All 10-100 km - Clears all check boxes in the column. No port will be set for
extended distance buffering.
– Set All 10-100 km - Places a check mark in all check boxes in the column and sets
extended distance buffering for all ports.
•
LIN Alerts
– Clear All LIN Alerts - Clears all LIN Alert check boxes in the column. LIN alerts
will be disabled for all ports on the switch.
– Set All LIN Alerts - Places a check mark in all check boxes in this column. LIN
alerts will be enabled for all ports on the switch.
•
Type
– Set All F_Ports - Sets all fields in this column to F_Port and configures all ports on
the switch as F_Ports.
– Set All G_Ports - Sets all fields in this column to G_Port and configures all ports on
the switch as G_Ports.
– Set All E_Ports - Sets all fields in this column to E_Port and configures all ports on
the switch as E_Ports.
•
WWN Binding
– Bind All WWNs - Places a check mark in all check boxes in this column and binds
each port to the device with the WWN or nickname entered in the Bound WWN
column for that port.
– Unbind All WWNs - Removes check marks in all check boxes in this column. A
device with any WWN can attach to all ports.
– Bind All Ports to Attached WWN - Places a check mark in all check boxes in this
column and binds each port to the device currently attached to that port. The Bound
WWN column will display that device's WWN.
Configure Ports 119