C
This operation will reset all director configuration data and non-volatile
AUTION
settings to factory default values. All optional features will also be disabled.
The director must be offline to continue.
2. Set the director offline. For instructions, refer to Set Online State on page 168.
3. To continue the reset operation, click Reset button on the Reset Configuration dialog
box. If you want to cancel the operation, click Cancel.
Table 4
Data Default Values
Configuration
Identification
Ports
Director Addressing
176
Reset Configuration
Description
Director Name
Director Description
Director Contact
Director Location
Port Names
Port Blocked States
Extended Distance (10-
100km)
LIN Alerts
Port Address
IP Address
Subnet Mask
Gateway Address
MAC Address
Default
NULL string
"Fibre Channel Director"
"End User Contact (please configure)"
"End User Contact (please configure)"
NULL strings
Unblocked
Disabled
Disabled
Port number plus 4
10.1.1.10 (E/OS 1.3 and above).
10.x.y.z, where x.y.z is a unique
number based on the MAC addres
(E/OS prior to 1.3)
255.0.0.0
0.0.0.0
PROM value