HP Surestore 64 - Director Switch User Manual page 196

This appendix lists and explains messages that may display in message boxes as you use
the Product Manager. Solutions to problems implied by each message are included when
applicable.
A
Message
Activating this configuration will
overwrite the current
configuration
All configuration names must
be unique.
All port names must be unique.
Another Product Manager is
currently performing a firmware
install.
A Product Manager instance is
open.
Are you sure you want to
delete firmware version?
Are you sure you want to
delete this address
configuration?
Are you sure you want to send
firmware version?
180 Appendix
Cause/Solution
Confirmation to activate a new address configuration. Click
to confirm activating the new address configuration or click
end the operation.
All address configurations must be save with unique names.
Save the configuration with a different name that is unique to all
saved configurations.
A duplicate port name was entered. Every configured port name
must be unique. Reconfigure the port with a unique name.
Only one firmware install to a specific director can take place at a
time. Wait for the current firmware install to complete and try
again.
Only one specific Product Manager instance can be open for a
product at any one time. Use the current open Product Manager
instance.
Requesting confirmation to delete the firmware version.
Firmware library can hold only eight firmware versions. Click
to confirm the firmware deletion or click
Confirmation to delete the selected address configuration. Click
Yes
to confirm the deletion of the address configuration or click
No
to end the operation.
Confirmation to add a firmware version to the firmware library.
The firmware library can hold eight firmware versions. Click
to confirm adding the firmware version to the firmware library, or
No
click to end the operation.
Yes
No
to
Yes
No
to end the operation.
Yes