Laser Safety - HP Surestore 64 - Director Switch User Manual

Laser Safety

When equipped with native Fibre Channel adapters, this product contains a laser internal
to the small form factor pluggable (SFP) transceiver module contained on the 4-port Fibre
Channel Adapter cards.
In the USA, the SFP module is certified as a Class 1 Laser product, conforming to the
requirements contained in Department Of Health and Human Services (DHHS) regulation
21 CFR, Subchapter J. The certification is indicated by a label on the metal SFP housing.
Outside the USA, the SFP is certified as a Class 1 Laser product conforming to the
requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment
11:1996.
The following figure shows the Class 1 information label that appears on the metal housing
of the SFP.
CLASS 1 LASER PRODUCT 21 CFR
Each communications port consists of a transmitter and receiver optical subassembly. The
transmitter subassembly contains internally a semiconductor laser diode in the wavelength
of either 850 nanometers (shortwave laser) or 1310 nanometers (longwave laser).
WARNING There are no user maintenance operations, service operations, or
adjustments to be performed on the SFP module.
Appendix 203