Using Telnet To Set Up A Host Server Name - HP NetStorage 6000 Management Manual

Managing the HP NetStorage 6000 Using Telnet
The Main Menu consists of the following sections:
• Operations
• Configurations
• Access Control
• Extensions

Using Telnet to Set Up a Host Server Name

To setup host server name, IP address, and the transmit rate:
1. From the Configuration Menu, select A. Host Name & Network. The following appears:
2. Select 1. Edit fields
3. Enter server host name, press Enter.
4. Enter the Maximum Transfer Unit (MTU). Press Enter for default.
5. Select the transceiver type, press Enter.
6. Enter the server IP address, press Enter.
7. Enter the network IP Subnet Mask, press Enter.
8. Enter the network IP Broadcast number, press Enter
9. Enter the network IP Gateway, press Enter.
10. Select 7. Save changes.
4
Press any number to perform the corresponding server operation.
Press any letter to perform the corresponding server configuration com-
mand.
Press any letter to set up access to the corresponding menu items.
Press any letter to select the corresponding extension. Use the space bar
to scroll through the extension list.