Table of Contents
Advertisement
Switch 7 - 6 RINGS SWITCH:
is set to "MANUAL' reception. Select "ON" if all calls are normally answered
within 6 rings and fax reception is desired when an operator is absent. Use
"OFF" if all voice and fax calls should be answered by an operator or not
at all.
2.
Programming Procedure
Programming all or a particular User Switch can be done with the following
procedure:
The display cursor wi!l flash on the current setting of the switch. To change
the setting, press the 0 or @ key. To skip switch setting and move to the next
switch decision, press the @I key. To go in reverse, press the 0 key. After mak-
ing decisions for all 7 switches, or if you wish to exit the procedure after set-
ting a particular switch, press the STOP/C key.
V PROGRAMMING
This function only operates when the machine
Repeat for
next decision
25
Advertisement
Table of Contents
