Remoteoperations; Programming Your Remote Code Number; Listening To Your Messages - Sharp UX-222 Operation Manual

.
REMOTEOPERATIONS
You can call the UX-222from any touch-tone telephone and play back your messages using the
remote commands. You can also use these commands to change reception mode and answering
machine settings.
Programming vour remote code number
.
To do any remote operations, you must first program a remote code number. .This number is used
to prevent unauthorised people from listening to your messages or changing the settings of your
machine. You can use any number up to 3 digits as the remote code number.
PROCEDURE
I
~
Step Press these keys:
Comments
1
2
3
4
5
6
FUNCTION
r-----l ml
Enter A.M. SETTINGS mode.
Move to REMOTE CODE and select it.
START COPY
c1
o
Press START/COPY.
~~l~(example)
Enter a number (max. 3 digits) using the numeric keys.
sTART CGPV
,
u
o ~ Press START/COPY.
Press STOP to return to standby mode.
L
—
J
Listening to your messages
TOLL SAVER
Whenyoucall
he UX-222 to listen to your messages, it will answer after two rings if it t as received
at least one message, or after four rings if it has not received any messages.
This enables you to save money on telephone charges, particularly if you are calling long distance.
]ang up before it answers, If the machine does not answer after the second ring, you can simply
saving the cost of that call.
USINGTHE ANSWERINGMACHINE
5-9