Programming An F-Code Memory Box; Memory) - Sharp MX-FXX1 Manual

Programming an F-code Memory Box (Polling Memory)
Follow the steps below to program a memory box for F-code polling memory. The sub-address and passcode that you
program in the memory box are necessary for the other machine to poll your machine (request transmission) using
F-code communication.
• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A total of 100 F-code memory boxes for all functions (polling memory, confidential, and relay broadcast) can be stored.
When 100 memory boxes are stored, no further memory boxes be stored. Delete unnecessary memory boxes and then
store a new memory box.
☞
Editing and Deleting F-code Memory Boxes
• A passcode does not need to be stored if the other machine does not use a passcode.
1
System Settings
Total Count
2
Paper Tray
Settings
Printer Condition
Settings
System Settings
Address Control
Direct Address / Program
3
F-Code Memory Box
Custom Index
System Settings
F-Code Memory Box
Polling Memory
4 Store
Polling Memory
Amend/Delete
SYSTEM
SETTINGS
Admin Password
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Relay
Confidential
Broadcast
Relay
Confidential
Broadcast
(page 158)
Press the [SYSTEM SETTINGS] key.
Touch the [Address Control] key.
Exit
Touch the [F-Code Memory Box] key.
OK
Touch the [Polling Memory] key in the
OK
"Store" (upper) row of keys.
150