Xi, Voice Communications; Use As A Telephone - Sharp FO-220 Operation Manual

XI, VOICE COMMUNICATIONS

I
The FO-220 can be used as a regular telephone to make strictly voice calls,
or to speak with the remote operator before or after a fax operation - on the
same connection. Convenient Hold and Redial Keys are available, as well as
autodialing of 32 voice telephone numbers.

USE AS A TELEPHONE

The FO-220 can be used as a telephone for just voice communication by dial-
ing after pciking-up the handset or by using the monitor speaker and dialing.
NOTES:
The FO-220 can still be used for voice communications with the machine
turned off, BUT the Rapid Keys, Speed-dial Codes, Redial Key and On-Hook
Dialing cannot be used.
Telephone numbers for voice calls that are entered into the autodialer with
speed-codes of 01 to 12 can be dialed quickly by using the corresponding
Rapid Key.
To check the programmed autodialing numbers for voice as well as fax calls,
print-out and refer to the Telephone List, see p.102.
To program the autodialer, refer to "Rapid Key/Speed-Dial/Secondary Autodial
Numbers': ~28.