Table of Contents
Advertisement
2. Selection of Programming Mode
The following general procedure can be used to access the programming mode
of any function listed in the previous chapter (except the last two nonstandard
functions). Refer to each function's programming chapter in this section for
a complete explanation of its programming procedure.
Press FUNC and enter "3". The message
shown on the right is displayed.
Press @or @ to select a particular func-
tion for programming. To scroll down,
press @one or more times. To scroll up,
press @ one or more times.
KEY
DISPLAY
FAX/TEL. # MODE
l-SET, 2-CLEAR
l-SET, 2-CLEAR
SECURITY SELECT
l - O N , 2 - O F F
OWN PASSCODE?
SET FAX #
DATE & TIME SET
DATE 12-20-88
(example)
TERMINAL # MODE
SET 3 DIGITS
V PROGRAMMING
FUNCTION
Rapid/Speed-Dial/Secondary
Polling Permission Numbers
Polling Security Selection
Transmit Terminal ID/Remote Terminal ID
Date & Time Settings
Terminal ID Number
Numbers
27
Advertisement
Table of Contents
