Table of Contents
Advertisement
24
Switch 1 - FINE RESOLUTION PRIORITY
resolution (better copy quality) is desired when transmitting or copying a
document. This setting can be overridden when desired by selecting a par-
ticular resolution setting with the MODE key. (Note: Using the "FINE" set-
ting may increase the time and cost of a phone connection over the
"STANDARD" setting.)
Switch 2 - NUMBER OF RINGS TO ANSER:
the machine is set to "AUTO" reception, and determines the number of rings
before the machine answers the call and starts fax reception. Use the "1
RING" setting when the machine has a dedicated line for fax, and all calls
should be answered immediately by the machine. Select the "6 RINGS' for
the a'bility to answer a call personally when desired before the 6th ring. If
you answer a call and hear a fax tone (someone is trying to send you a
fax), press the START key and hang-up for reception to begin.
Switch 3 - LENGTH OF ACTIVITY REPORT:
wish to have the Send/Receive (Activity) Reports printed 11" in length. Use
the "VARIABLE" setting to have one continuous print-out of each report,
where length is dependent upon amount of data stored since last print-out.
(Note: "VARIABLE" setting will conserve paper when stored data does not
fill-up complete 11" length report.)
Switch 4 - AUTO PRINT-OUT Select "YES" to have the machine automatically
print-out the Send/Receive Activity Reports after every 30 transactions since
the last print-out. The report can still be printed on demand when desired.
Use "NO" to print-out the report only when necessary. (Note: If the report
is not printed by the 30th transaction, the older data will be erased. All data
is erased after it is printed out.)
Switch 5 - RECALL WAIT INTERVAL: Select "1 minute" when automatic
redials of a busy telephone number should be made quickly. Use "5 minutes"
setting for a longer wait period.
Switch 6 - NUMBER OF RECALLS: Select "5 recalls" for maximum redial
attempts with a busy telephone number. If connection is not made after
5 or 2 redials, Transaction Report will automatically print-out and you will
find original documents still sitting in the automatic document feeder.
V. PROGRAMMING
Select the "FINE' setting if a higher
This function only operates when
Select the "11" setting if you
Advertisement
Table of Contents
