N S T A L L A T I O N A N D C O N N E C T I O N - Sharp FO-220 Operation Manual

22
5. Selecting the line selector on left side of
the machine.
Select 10 or T according to the type of tel-
ephone line used.
10: Dial pulse telephone mode 10 pps
T: Pushbutton telephone mode
If the setting is incorrect, you cannot
l
make a call.
6. Plug the power cord into a 12OV, 60Hz, wall
outlet.
Turn on the power switch.
7. Place the recording paper roll (Sharp
FO-20PR6) into the paper compartment.
Refer to p.107.
8. Proceed to PROGRAMMING section on
p.23.
IV. INSTALLATION AND CONNECTION
Line selector