74
3. Press the POLL key.
4. When "POLLING MODE" appears in the
display, hang-up the handset if used.
5. Reception takes place.
Upon completion, a tone sounds for 3
seconds and the machine returns to the
standby mode.
6. Cut the recording paper by pulling the
document up against the tear bar.
5. Turnaround Polling
This operation is used to send documents to a remote unit after receiving docu-
ments from the same unit through polling. Transmission and reception, there-
fore, can take place with one phone call.
NOTES:
The remote unit must also have "Turnaround Polling" capability.
l
Refer to other notes under "Polling Reception'!
l
PROCEDURE:
Place documents to be sent in feeder and follow same procedure for "Polling
Reception".
Transmission will take place automatically after reception.
XII ADVANCED FEATURES
POLL