Sharp FO-220 Operation Manual page 56

Hide thumbs Also See for FO-220:
Table of Contents

Advertisement

The FO-220 can make a sample copy of documents you may wish to transmit.
This feature allows you to confirm how the copy would look at a receiving
machine and to determine if the MODE key setting needs an adjustment.
With this function, the FO-220 can also act as a convenience copier when
necessary.
NOTES:
If the STOP/C key is pressed during copying, copying will stop and the docu-
ment will be discharged.
During copy operation, the machine is in the MANUAL receive mode.
If a call comes in from a remote machine during this time, first make voice
communication by picking up the handset.
You can begin facsimile reception once the copying operation is complete
by pressing the START/COPY key and hanging-up.
Also you can use the STOP/C key to stop copying immediately.
If you do not use the MODE key, FINE/AUTO-CONTRAST mode in used.
1. Open the document hopper, adjust the
document guide and place the document(s)
face-down in the document feeder.
2. Select the resolution/contrast setting with
the MODE key. (Refer to "Selection of
MODE Key Setting", p.44.)
FUNC MODE
I
STOP/
Continue

Advertisement

Table of Contents
loading

Table of Contents