Table of Contents
Advertisement
[3] INSTALLATION PROCEDURE
1. Install of expansion kit
A. Parts included
PWB spacers: 2 pcs.
Fax PWB: 1 pc.
Fax connector cover:
Speaker unit: 1pc.
M3 golden screws:
M3 screws with
2 pcs.
washer: 8 pcs.
Installation manual:
Operation manuals:
1 sheet
Line adapter: 1 pc.
(For SUK, SEB,
SEES, SEZ)
B. Installation procedure
Turn off the main switch of the copier and then remove the
power plug of the copier from the outlet.
1) Remove the shielding plate and the left rear cabinet.
Remove the five screws that fix the shielding plate and then
remove the shielding plate by inserting a flat-blade screwdriver.
Then, remove the two screws that secure the left rear cabinet and
slide the cabinet toward the rear side of the main unit to remove it.
Shielding plate
Screws
TEL/LIU PWB: 1 pc.
Line cable: 1 pc.
1 pc.
Supplied label:
1 sheet (For SUK)
Quick reference
booklet: 1pc.
1 pc.
(For SEN, SEB)
Screws
Left rear cabinet
AR-FX7 INSTALLATION PROCEDURE 3 - 1
2) Work the left rear cabinet.
Cut and remove the cut-out portion from the left rear cabinet using
a tool such as nippers.
Be careful about the direction of the tool so that the cut surface is
flat.
3) Attach the speaker.
Attach the speaker to the left rear cabinet using supplied two
golden screws (M3).
4) Attach the fax PWB
Mount the two spacers on the fax PWB.
Then, insert the connector of the FAX PWB to the connector of the
FAX expansion PWB and secure it using six M3 screws with
washer.
M3 Screws with washer
Fax PWB
Spacers
M3 Screws with washer
Cut-out portion
M3 golden screws
Advertisement
Table of Contents
