Table of Contents
Advertisement
D. POLLING PERMISSION NUMBERS
If the Polling Security function of the next chapter is used, only remote machines
whose fax numbers have been entered as Polling Permission Numbers in your
unit will be allowed to poll your unit. (When a remote unit polls your unit, the
remote unit "picks-up" any documents from the feeder of your unit it initi-
ates a transmission from your unit to the remote unit.) Up to 10 different fax
numbers can be entered as Polling Permission Numbers.
NOTES:
To check programmed Polling Permission Numbers, print-out and refer to the
l
"Passcode List" (see p.103).
The Polling Permission Number should be the same number programmed
l
into the remote unit as its Remote Terminal ID (RTI) number.
If incorrect data is entered during the procedure, press the STOP/C key to
l
erase the previously-entered data, then enter the correct data.
1. Entering Polling Permission Numbers
Operation
Step
FUNC
1
2
3 @, @
(An
4
(An example)
START/COPY
5
STOP/C
6
(step 3) or [
V PROGRAMMING
Standby mode.
Select the Polling Permission Number program-
ming mode.
Select the entry mode.
Enter a 2-digit Polling Permission code number
example)
(01-10) by using the numeric keys.
Enter the RTI (fax number) of the remote unit
(max. 20 digits).
Press the START/COPY key.
Return to step 3 to enter next Polling Permis-
sion Number or press the STOP/C key to exit
procedure.
Description
31
Advertisement
Table of Contents
