Table of Contents
Advertisement
Before a document is transmitted or copied, one of four special settings can
be selected by using the MODE key:
to achieve best transmission speed possible.
FINE (resolution) - use this setting for documents small characters or fine
(2)
drawings.
H-TONE (half-tone) - use this setting when your original document(s) con-
(3)
tains photographs,
16 shades of grey.
CONTRAST DARK - use this setting for very light originals.
(4)
NOTE: The FO-220 has an Automatic Contrast Control. Therefore, the unit
should normally be kept at the "CONTRASTAUTO" setting, unless document
is very light.
GENERAL NOTES:
To check the reproduction quality of a document with or without a special
l
MODE key setting, make a copy of the document on the unit and make any
adjustments if necessary after reviewing copy.
If you change a MODE setting during a multi-page transmission/copying oper-
l
ation, the mode change becomes effective with the following page.
If you do not select a special MODE key setting, the unit will automatically
l
use the default mode (STD or FINE) as programmed in User Switch#l and
CONTRAST AUTO.
illustrations or gradations. Copy will be reproduced in
Advertisement
Table of Contents
