Table of Contents
Advertisement
B. TALK FUNCTION (Talk and Fax)
The TALK function is used to speak with the operator of a remote unit. It allows
you, therefore, to carry on a conversation and send or receive a fax on the
same phone connection. The TALK function can be initiated before transmit-
ting a document, or during a transmission or reception. When transmission or
reception stops abruptly, the machine may also enter the TALK mode automat-
ically.
NOTE:
The TALK function can only be used when communicating with another Group
3 machine in the G3 mode which also has the TALK function (see "Compatibili-
ty," p.12).
1. Voice Communication Before Transmission
The TALK function is used before transmission when sending to a remote unit
in the AUTOMATIC receive mode. In this case, a remote operator would nor-
mally not answer the call.
NOTES:
Only full telephone numbers can be used for dialing when requesting a con-
versation before transmission.
If a Rapid Key or Speed-Dial Code is used, then a conversation is requested
after transmission.
If a person on the other end of the line does not answer the call within a
short period of time, the TALK mode is automatically cancelled, and the
machine returns to the STAND-BY mode.
XI. VOICE COMMUNICATION
65
Advertisement
Table of Contents
