Table of Contents
Advertisement
C. OPERATION PANEL
SPEED key
HOLD key
SPEAKER key
LCD
III GENERAL PRODUCT OVERVIEW
These keys are used to program machine
operations (enter times, names, numbers, etc)
or to dial a facsimile telephone number.
For speed dialing, first press this key and then
enter the speed number (two digits) with the
numeric keys.
When this key is pressed in the standby state,
the last number dialed (by normal dialing,
speed dialing, rapid dialing or redialing) can
be automatically redialed.
When programming rapid or speed dial num-
bers, if you wish to put a pause (2 set) be-
tween numbers, press this key. Each pause
entry is represented by "-I' on the display. One
or more pauses can be entered.
Places the line on hold during voice commu-
nication.
Pressing this key allows you to dial with the
handset on-hook. After pressing the key, rapid
dialing and speed dialing for voice communi-
cation are also possible.
The handset is picked-up after you hear a
response.
Displays, during transmission, the name of the
other party with whom you are communicat-
ing, their telephone number and the current
operating state, and, during programming
operation, various messages including infor-
mation on the next operating step.
17
Advertisement
Table of Contents
