Batch Page Numbering; Sending A Fax From Memory - Sharp UX-D1200SE Operation Manual

Batch Page Numbering

Batch Page Numbering
Use this feature to add a slash and the
total number of pages to each page
number on transmitted fax pages (for
example, "P. 1/5", "P.2/5", etc.). This
allows the recipient to check for missing
pages.
1
Load the document(s).
MENU
2
Press , then
COUNTER] appears.
3
Press .
Display: [
ENTER # (01 - 99)
4
Enter the total number of pages
("01" to "99") with the numeric keys.
Example: 5 pages
5
If desired, press
resolution and/or contrast.
6
Dial the receiving machine and
send the fax.
•
To cancel a batch number entry,
remove the document from the
feeder or press
•
If the number of pages actually
transmitted is not the same as the
batch number entered, an alarm will
sound and [PAGE COUNT ERROR]
will appear in the display. "PAGE E."
will also appear in the NOTE column
of the Transaction Report if printed.
56
until [PAGE
]
.
RESOLUTION/
RECEPTION MODE
to set the
STOP
.

Sending a Fax From Memory

To increase transmission speed, you
can send a fax through the machine's
memory. After transmission, the fax is
automatically cleared from memory.
Note: If a power failure occurs while
sending a fax from memory, you must
repeat the operation.
To send a fax through memory, load the
document, press
one of the methods below. (Note that
an e-mail destination cannot be
selected.)
♦
Press a Rapid Key.
♦
SPEED DIAL
Press , enter a 2-digit Speed
Dial number, and press
♦
Enter the fax number with the number
keys and press
♦
Press repeatedly to select an
auto-dial number and press
♦
Press once to select the last
number dialed and press
If [MEMORY FULL] appears, see If the
memory becomes full on page 61.
, and dial using
.
.
.
.