Snapshots; Dynamic Volume And File System Creation - HP StorageWorks XP10000 - Disk Array Configuration Manual

HP Scalable NAS can use either one or three membership partitions, but to ensure that a membership
partition is always available, we strongly recommend that you use three membership partitions.
HP recommends that you create three LUNs for the membership partitions. Each LUN should be a
minimum of 1 GB in size.

Snapshots

Snapshots are not currently integrated into the HP Scalable NAS software for Windows.

Dynamic volume and file system creation

When the LUNs have been presented to all nodes in the cluster, import them into the cluster using the
GUI or the mx command. After the disks are imported, and you have put a partition table on them as
described previously, you can then use them to create dynamic volumes and file systems, mount them
on the cluster nodes, and assign drive letters or junction points.
For details on importing and deporting disks, dynamic volume creation and configuration, and file
system creation and configuration, see the HP StorageWorks Scalable NAS File Serving Software
Administration Guide .
30 HP Cluster Gateway deployments