Intergraph InterServe 8000 System Reference Manual page 88

80
Sensor
Ambient
Sensor1
Sensor2
Sensor3
Sensor4
CAUTION Temperatures that are approaching the unsafe levels are indicated by
Wm status should be monitored closely. Adjust room temperature and ensure the fans are working. If
room temperature is less than 80 degrees Fahrenheit and the fans are spinning, the fan speed may be
too slow to provide adequate cooling.
WARNING If a sensor reports
damage internal components.
Location
Next to drive access door (room air
temperature)
Between the processors and the power
distribution board
Between the memory modules, near the
rear air vent
At the middle of I/O expansion board
Next to ISA slot 4
HOT , power off the system to protect it from overheating, which could
Warm (Wm) Hot (Hot)
32 C (90 F) 35 C (95 F)
42 C (108 F) 45 C (113 F)
42 C (108 F) 45 C (113 F)
42 C (108 F) 45 C (113 F)
47 C (117 F) 50 C (122 F)
. Any sensor that reports a
Wm