Printing The Color Registration Chart; Determining Values - Dell 3110 Color Laser User Manual

To adjust the color registration when you first install the printer or after moving it to a new location, follow
the procedure below. See

Printing the Color Registration Chart

Use the operator panel to print the color registration chart.
1. Press Menu.
2. Press until Admin Menu appears, and then press
3. Press until Maintenance appears, and then press
4. Press until Color Reg Adj appears, and then press
5. Press until ColorRegi Chart appears, and then press
The color registration chart is printed.

Determining Values

From the lines to the right of the Y (Yellow), M (Magenta), and C (Cyan) pattern, find the values of the
straightest lines.
NOTE: You can also use the densest colors of the lattice pattern to find the straightest lines. The
colors printed at the highest density are those next to the straightest lines. When 0 is the value
nearest the straightest line, you do not need to adjust the color registration. When the value is not 0,
follow the procedure outlined in
"Operator Panel" and "Color Reg
"Entering Values".
Adj" for information about the operator panel.
.
.
.
.