Dell 3110 Color Laser User Manual page 48

Address Sets the address in the address field. Enter a numeric value between 0 and 255 in
each field of "aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to
"aaa."
Address Mask Sets the Subnet Mask in the mask field. Enter a numeric value between 0 and 255 in
each field.
Active Reject Rejects printing from specified network address.
Mode
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
When you make the settings for the filter, enter the IP address of the IP Filter in the Address field and the
Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "* " is
appended to the current value.
Setup Procedure
You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first
before proceeding to the next longer address when setting multiple filters.
The following section explains how the IP Filter operates.
IP Filter Procedure
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10 " IP address.
Procedures:
1. Click the first column of Access List row 1 .
2. Enter "192.168.100.10 " in the Address field and "255.255.255.255 " in the Address Mask field.
3. Select Permit .
4. Click Apply New Settings .
Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the "192.168.100.10 " IP address.
Procedures:
1. Click the first column of Access List row 1 .
2. Enter "192.168.100.10 " in the Address field and "255.255.255.255 " in the Address Mask field.
3. Select Reject .
4. Click the first column of Access List row 2 .
5.
6.