Table of Contents
Advertisement
When you select a new setting from the operator panel, an asterisk appears next to the setting to identify it
as the current user default menu setting.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1.
Press Menu.
2.
Press
or
until the required menu appears, and then press
3.
Press
or
until the desired menu or menu item appears, and then press
If the selection is a menu, the menu is opened and the first printer setting in the menu appears.
If the selection is a menu item, the default menu setting for the menu item appears.(The current
user default menu setting has an asterisk (*) beside it.)
Each menu item has a list of values for the menu item. A value can be:
A phrase or word to describe a setting
A numerical value that can be changed
An On or Off setting
Press
and
return the settings to the factory default menu settings.
4.
Press
or
to scroll until the desired value appears.
5.
Press
.
This enables the setting value, which is indicated by an asterisk (*) next to the setting value.
6.
Press Cancel or
To continue setting other items, select the desired menu. To quit setting new values, press Cancel.
Driver settings may override changes previously made and may require you to change the operator panel
defaults.
NOTE:
Driver settings you choose from your software program may override the settings you select
from the operator panel.
Using the Dell Printer Configuration Web Tool to Change
at the same time. This will recover the factory default menu settings. Press
to return to the previous menu.
.
.
to
Advertisement
Table of Contents
