Option Problems - Dell 3110 Color Laser User Manual

Partial blanks, creased
paper or blotted printing.
Vertical blanks

Option Problems

If an option does not operate correctly following installation or stops working:
· Condensation inside the printer causes partial blanks or creased paper. Keep
the printer turned on and leave it more than one hour to get rid of the
condensation. In winter, keep the printer turned on to prevent condensation
from forming. In this case, you can reduce power consumption by using the
energy-saving mode. If the problems still occur, contact Dell. See
"Contacting Dell" in the Owner's Manual.
· This occurs when you print on talc paper or acid paper. Use neutralized paper.
· A print cartridge is damaged. Replace the print cartridge with a new one.