Dell 3110 Color Laser User Manual page 366

To specify the User Name for Authentication Printing:
You can specify a unique user name in the environment variable as follows.
% setenv JOWN3110U " jobownername"
You can specify the login name as the user name as follows.
% setenv JOWN3110U ""
NOTE: Up to 32 characters are acceptable for the user name. When a user name exceeds allowable
character length, the extra characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option
has the higher priority over authentication printing.
Specifying the Password
To Specify the Password for Authentication Printing:
If you need to specify the password in authentication printing, you can specify the password in the
environment variable as follows.
% setenv JOWN3110P "password"
If you do not specify the password inexplicitly, type as follows.
% setenv JOWN3110P ""
NOTE: Acceptable password length is between 4 and 12 characters. When an unacceptable character
is specified for password, or when a specified password is not within the range of the allowable
character length, the extra characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option
has the higher priority over authentication printing.
NOTE: If you only specify the password without specifying the user name in the environment variable,
the login name is assumed as the user name.
NOTICE: If you enter the password in the login file for automatically allocating the environment
variable when you log in, you are recommended to specify the appropriate access privilege that
prevents unauthorized users from reading the login file.
txt2ps2 (Linux/Solaris/HP-UX)
Format
/usr/local/dellbin3110/txt2ps2 [-d] [-D] [-Itray-input] [-t] [-2] [-r] [-F] [-llines] [-
wcolumns] [-ooutcolumns] [-Loutlines] [-en] [-ssize] [-E] [-ffont] [-Nc=copies] [-cl] [-ps]
[-mg=up:bottom:right:left] [-Hd=position:format:page] [-Hffont] [-MSI] [-M=type] [-Mfo=mode]
[-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-Gc=mode] [-Sc=mode] [-
Gg=mode] [-Cb=cyan-low:cyan-middle:cyanhigh:magenta- low:magenta-middle:magenta-high:yellow-
low;yellow-middle:yellow high:black-low:black-middle:black-high] [-