Dell 3110 Color Laser User Manual page 208

016-318
Restart Printer
Reseat Memory
Contact Support
016-340
Restart Printer
Contact Support
IfMessageReturns
016-330
Restart Printer
Reseat MPC
Contact Support
016-338
Restart Printer
Reseat Wireless
Contact Support
NNN-NNN
Restart Printer
Reseat XXX
Contact Support
Paper Jam
077-901
Open Front Cover
Remove Paper
Paper Jam
077-907
Open Front Cover & Belt
Unit
Remove Paper
Paper Jam
NNN-NNN
Open XXX
Open YYY
Paper Jam
077-903
Remove Paper
Open & close Front
Cover
Insert PrintCart
NNN-NNN
Insert
XXX Cartridge
The additional memory
module is not fully
inserted into the slot.
A communication error
occurred in the network
interface card.
A communication card
error occurred between
the network interface
card and control card.
An error occurred in the
wireless printer adapter.
XXX is not fully inserted.
Error NNN-NNN relates
to printer problems.
The printer detects a
paper jam.
XXX and YYY indicates a
position that you open.
Error NNN-NNN relates
to printer problems.
The printer detects a
paper jam. N indicates
the tray number.
The specified print
cartridge is either
missing or not fully
inserted into the printer.
XXX is one of the
following:
· Black
Remove the additional memory module from the slot,
and then reattach it firmly. If this does not solve the
problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn the printer off and then on. If this does not solve
the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn off the printer to re-install the multi protocol
card, and then turn the printer back on again. If this
does not solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Turn the printer off and then on. Ensure the
following:
· The wireless printer adapter is securely inserted into
the slot on the controller card.
· Unauthorized USB devices are not used.
If this does not solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Confirm that the unit is securely inserted. If this does
not solve the problem, contact Dell.
See "Contacting Dell" in the Owner's Manual.
Clear the paper path.
When "Reg Cover" appears in XXX, the procedure to
remove print media is different depending on whether
the duplexer is attached or not.
See "Clearing Jams"
Pull out the specified tray and clear the paper path.
See "Clearing Jams"
Reinsert the specified print cartridge.
See "Replacing Print Cartridges"